BH0305 Cut as BH0305, All Polished. 2″ Rock Front Nosing, BRP , 2-0 x 0-6 x 1-0 , (2) 0-10 x 0-10 x 0-4, (2) 0-6 x 0-6 x 3-6 , 2-8 x 1-0 x 0-10 , 4-0 x 1-6 x 0-8
BH0310 Cut as BH0310, All Polished, Rounded Ends, 6″x 2″ Polished Checks, (18) Steeled Flutes , Die : 3-6 x 0-8 x 2-2 , Base : 4-6 x 1-2 x 0-8
BH0316 Cut as BH0316, Polish (3), BRP, Rock Boulder Face , Die : 2-6 x 0-8 x 2-2 , Base : 3-0 x 1-2 x 0-8
BH0317 Cut as BH0317, All Polished, Flat Carved (1) , Die : 2-6 x 0-6 x 1-8 , Base : 3-0 x 1-0 x 0-6
BH0318 Cut as BH0318, All Polished, Flat Carved (1) as BH0318 , Die : 3-6 x 0-6 x 1-8 , Base : 4-6 x 1-0 x 0-6
BH0616 Cut as BH616, Polish (2), BRP, Shell Rock Front , Die: 2-6 x 0-6 x 2-2 , Base : 3-6 x 1-0 x 0-6
BH0617 Cut as BH0617,
All Polished,
(6) Tooled Flutes , Die : 2-6 x 0-6 x 2-4 , Base : 3-6 x 1-0 x 0-6
BH738 Cut as BH738, All Polished , Polished Facets on Front Circle All Polished , 3-0 x 0-6 x 2-0 , 1-0 x 0-6 x 1-0 , 4-0 x 1-0 x 0-6
BH744 Cut as BH744, All Polished, Apex Top, Polished Scotia, (2) Dowel Holes in Joint , 3-8 x 0-10 x 0-10 ,0-8 x 0-8 x 3-4 , 1-2 x 0-8 x 2-4 , 3-6 x 1-8 x 0-6 , 4-6 x 1-4 x 1-8
BH750 Cut as BH750, All Polished, Polished Facets on Front , 3-6 x 0-8 x 2-2 ,0-6 x 0-6 x 0-10,4-0 x 1-2 x 0-8
BH757 Cut as BH757, Polish (2), Serp Top, SE, BRP, (1) Sawed notch to receive Seat of 2″X4.25″ on Right End, Carved (1) , 2-0 x 0-8 x 2-6 , 2-6 x 1-2 x 0-4 , 0-10 x 0-4 x 0-8 , 5-0 x 1-2 x 0-6
BH784 Cut as BH784, Polish (5), Flat Top, SE, (2) 9″ 6″ x 9″ deep cremation holes in top, Carved (1) ,Cut as BH784, Polish (5), Flat top, SE, 1″ x 1″ Steeled check around , 2-6x 0-10 x 1-8 , 2-6 x 0-10 x 0-5 , 3-0 x 1-2 x 0-8
BH785 Cut as BH785, Polish (5), Flat Top, SE, 1″x 1″ Steel Check Around Bottom, (1) 6″ X 9″ deep Cremation hole in bottom of Each One , (2) 1-0 x 1-0 x 1-0 , 1-6 X 1-6 X 0-6
BH818 Cut as BH818 , Polish Face , Sawed Back , BRP , Carved (1) , Die : 3-0 x 1-0 x 1-6 , Base : 4-0 x 1-2 x 0-6
BH825-30 Cut as BH825, Polished (2), BRP, Shell Rock Front , Die : 2-6 x 0-6 x 2-2 , Base : 3-0 x 1-0 x 0-6
BH825-36 Cut as BH825, Polished (2), BRP, Shell Rock Front . Die : 3-0 x 0-6 x 2-2 , Base : 4-0 x 1-0 x 0-6
BH841 Cut as BH841, Polish (2), Brp, Shell Rock Front , Die : 2-0 x 0-6 x 2-0 , Base : 3-0 x 1-0 x 0-6
BH850 Cut as BH850, Pol.(2), BRP, Scalloped (2) Sides, Shell Rock Front, Carved (1) , Die : 3-0 x 0-6 x 2-6 , Base : 4-0 x 1-0 x 0-6
